Monster Energy Wall Art
![monster6.jpg](/proxy/?url=https://content.instructables.com/F8U/024I/HAWBXOCU/F8U024IHAWBXOCU.jpg&filename=monster6.jpg)
I made this wall art for my friends birthday. He likes monster energy drinks and I was really sick of looking at the thing he had hanging on the wall before.
I used a jigsaw, 1x8 boards, and red paint.
I used a jigsaw, 1x8 boards, and red paint.
Drawing
![monster3.jpg](/proxy/?url=https://content.instructables.com/FUA/AZWB/HC3QC5YA/FUAAZWBHC3QC5YA.jpg&filename=monster3.jpg)
First I drew each scratch of the logo on paper in case I wanted to make this again.
You can either draw each of them by hand like me or use a projector.
You can either draw each of them by hand like me or use a projector.
Trace to Wood
![monster2.jpg](/proxy/?url=https://content.instructables.com/FGH/EM1G/HC3QC5Y4/FGHEM1GHC3QC5Y4.jpg&filename=monster2.jpg)
I traced the paper cut outs onto the 1x8 boards next
Cut It Out
![monster1.jpg](/proxy/?url=https://content.instructables.com/FUD/P3OZ/HC3QC5XP/FUDP3OZHC3QC5XP.jpg&filename=monster1.jpg)
After I was finished getting the logo drawn on the wood, I cut each part out with a jigsaw
Paint It
![monster6.jpg](/proxy/?url=https://content.instructables.com/F8U/024I/HAWBXOCU/F8U024IHAWBXOCU.jpg&filename=monster6.jpg)
Paint it any color! I used red because it was what I had, and I knew it matched his room colors. I also added two small screws to each separate part and wrapped a wire between them so the wire hangs on a nail when it is hung. I tried to get a picture but there was an error each time I tried to upload it. Thanks for checking this out!