My Multi Task for Pencil and Flash Tools.

by torx in Workshop > Organizing

4698 Views, 82 Favorites, 0 Comments

My Multi Task for Pencil and Flash Tools.

273.JPG
254.JPG
"Where I left the pencil? "
This is the question I most often when I'm doing the work, particularly at the stage where you have to do the tracking of parts but also after,I thought then to create a small pocket on hand to hold the pencil. After some thoughts I thought to do something a little more varied inspired by something seen around.

The Components

254.JPG
255.JPG
The components are easy availability: a piece of leather or similar, two elastic belt with velcro, a penknife and a magnet. to paste the whole thing I used hot glue and adhesive cyan acrylic.

257.JPG
259.JPG
260.JPG
The various pockets were originally pasted with hot glue but glued acrylic glue cyan.

262.JPG
After you paste properly all pockets I inserted the straps with velcro for a first test.

269.JPG
And here's the first result.

272.JPG
273.JPG
274.JPG
 Allow a greater comfort I created of vents in the entire surface of the box; this has also helped strengthen the pockets of the joints with a certain aesthetic character.
And here's the final result.

Appendix

275.JPG
276.JPG
011.JPG
I wanted to take away my desire to build a small version of my " port pencil": a minimal version.
Here it is.
And now I cannot say "where is over pencil?"... ... or maybe .... I have to say "where has the port pencils?"
Finally a photo of an application a little more "sporty" and with a character closest to the electrician gear pouch.Thank you all for your attention and for your patience; I hope this instructable may be helpful to someone or, perhaps a basis for further elaboration or improvement as sometimes I happen by browsing these pages. thank the site for your kind hospitality and do appointment to the next ... bye.