New York Bedside Lamp | Laser Cut | Landmark

In this blog, you can try to make a New York Bedside Lamp. It's comprised of two parts: 3 mm plywood and led light. If you have a laser cutter, you can try make one.

MATERIALS:

1. 3mm thickness plywood (30*45cm),
2. Glue,
3. Light string or LED light

EQUIPMENT:

1. 20W NEJE Laser Cutter
2. Software: Lightburn

You will only need to cut with this file. I use light-burn as my laser working software. There're two holes in the third and fourth layer, you can adjust the hole due to your led light style.

Your machine should be large enough for laser engrave and cut a 30*45cm plywood sheet. Otherwise, you may need to adjust your file. I used NEJE MAX 4 v2(700*460mm). Once you adjust your settings, you can start cutting.

After the production is completed, assemble it layer by layer according to the order of the picture. Because the thickness of the wood can vary slightly, you may need glue to secure it. This lamp can be completed by inserting the led light string or small lights through the hole on the third and fourth layer.

Enjoy your lamp!