Paranormal Hunter Multitool

Have you ever been interested in becoming a paranormal investigator? or have you watched popular tv shows or youtube videos of paranormal hunts? Usually in these videos a "ghost" can throw or break expensive equipment or drain a battery. Well with this paranormal multitool that fear and stress can be eliminated completely. Today I will be explaining how to create your own Paranormal Hunting multitool!!! I have always been excited to learn more and seek out anything on the paranormal or conspiracies, so I was very excited to create this and share with you on how to create your own if you too are a fellow lover of the dark and mysterious!!!

2 CCTV Camera

1 Camcorder

1 Web camera

1 Table top Speaker

2 Headsets

1 Monitor stand

2 Monitor stand attachment

Tape

1 Velcro strand

For my first step I collected all my supplies and found what I thought were going to be a useful item to add to my final project. after analyzing the collection of cameras, I started with mounting the tabletop speaker to my monitor stand by wrapping the extending wiring connected to the the speaker onto the stand then I had sealed it together with some tape just to make sure it didn't fall and would just add a bit more security. I also added a small stand attachment with the tape at the top of the Monitor stand to that later on when adding the camcorder, we would have something to secure it too.

Now that the speaker is added to the monitor stand, I was able to start adding the multiple cameras, I first added one of the CCTV cameras on top of the speaker that we had previously added made sure it was in the desired position and sealed it in by wrapping tape around the camera onto the speaker so that it'll stay in place and not fall off. Now onto the other side I added the second CCTV camera onto the monitor stand with the tape as well to secure it.

Now that we have our two CCtv cameras added to our project its now time to add the webcam. I had done this by sliding a second stand attachment though the first one that I had previously added then I had taped the bottom half of it to the monitor stand to secure it in place. I then got the web camera and slid the wiring in between the stand attachment I had just added, and the monitor stand I then secured the bottom of the web camera with a little bit of tape just to hold it in place.

To add the camcorder, I had positioned it on top of the monitor stand attachment that I had previously added and wrapped tape around the camcorder onto the stand attachment. since the camcorder was heavier than the CCTV cameras, I added a Velcro strand around the camcorder and the stand attachment just to add a little extra security so that I won't fall off and stay put.

The last step of assembling the project was adding the microphones to the CCTV cameras. I took a headset and broke off the microphone portion of it with a screwdriver I was then able to connect the microphone onto the CCTV cameras with tape.

The last thing I did which is completely optional is the finishing touches of wanting better pictures of my project once fully assembled. I had added the final pictures of the project into ChatGPT to help make more appealing images of the project.