Ribbon Zipper Bag (fully Lined)

by Mark Montano in Craft > Sewing

3346 Views, 98 Favorites, 0 Comments

Ribbon Zipper Bag (fully Lined)

Screen Shot 2014-06-21 at 3.19.19 PM.png
CG.png

Make fully lined ribbon zipper bags (for pencils, change or cosmetics) with this easy tutorial.

Watch the Video Tutorial Here

How to: Ribbon Zipper Bag (fully lined)

You'll Need

Screen Shot 2014-01-24 at 6.07.40 PM.png

Scissors

1/4 yard lining

1/4 yard fabric

4 colors of 1" wide ribbon (about 12" of each color)

Sewing machine with zigzag stitch

Iron

10" zipper

Contrasting thread

1st Quad.jpg

Press your fabrics

Using a sheet of 8 1/2" x 11" paper as a pattern, cut out 1 piece of fabric and 1 piece of lining

2nd quad.jpg

Cut your ribbons to size and pin them in place on your outer fabric

Zigzag stitch them to the fabric

3rd Quad.jpg

Place your zipper face down on the 8 1/2" edge of your fabric and stitch it in place

Take the other end of your fabric and stitch it to the other side of the zipper

Take your lining and place it on top of the zipper, lining it up with the fabric and stitch it across *You are sandwiching the zipper in between the fabric and the lining

Stitch the other side of the lining on the other side of the zipper.

Screen Shot 2014-01-24 at 6.13.42 PM.png

This is what it should look like

4th quad.jpg

Cut of the END of the zipper only

Stitch across that side of your bag using 1/2" seam allowance

Unzip the zipper to the middle of the bag

Stitch across the other side leaving a 2" hole (so you can turn it right side out)

Turn your bag right side out through the hole and stitch your 2" hole closed

5th Quad.jpg

Tuck the lining inside the bag and then press the fabric around the zipper!

You're done!