S&M Rubber Chicken Air Gun

Yup. What you read is what I made. In this Instructable I'll teach you what you need to make a your own DIY S&M Rubber Chicken Air Gun.

It's pretty simple and doesn't take many parts, and most of the stuff are things you can find at your local 99 cent store and Home depot.

PARTS NEEDED

1. Rubber chicken

2. Vinyl tubing roll (Everbilt 3/8 - Yellow label from home depot)

3. One 1/2 polly alloy elbow

4. One C02 bike pump

5. Clear Can Storage Container

6. Extra C02 containers

7. 1 red bouncy ball or other

8. One used bike tire

9. Plastic BB's, Rice, Glitter, and or Rubber Darts from Toy dart Gun.

TOOLS NEEDED

1. Hot glue gun

2. Exacto knife

3. Drill and drill bits

4. Sharpie marker

5. Scissors

STEP 1

De-head rubber chicken and cut out bottom part off head. You will see a centered squeaky toy device. You need to remove this to create an open cavity.

STEP 2

Using Vinyl tubing in back of Rubber Chicken Head trace hole the size of vinyl tubing and use exacto or drill to make hole through back of head. This hole is what will feed tubing from back of head to front of head.

STEP 3

Drill hole through rubber ball the size of the tubing and feed tubing through hole. This will hold the tubing in the chickens mouth and become part of his kinky ball and gag outfit.

STEP 4

Mark hole about 1 - to 1.5 inches from back of head to connect 1/2 inch worth of vinyl tubing and create a T-shaped piece of vinyl. This is what the hopper will connect to. Hot glue together to make airtight fit.

STEP 5

Using 1 polly elbow connect to vinyl tubing to direct tubing down towards bottom of chicken.

STEP 6

Cut out rectangular box about 2.5 inches tall centered on back of chickens neck. You will end up cutting into his back and neck part. This cavity is what you will feed the bike pump though to rest inside his body and hide the pump.

STEP 7

Cut bike valve tube off tire and trim as close as you can to the diameter of valve tube. In conjunction you will twist this into the bike pump to connect the airflow.

STEP 8

Cut and connect small piece of vinyl tubing to connect air pump valve to polly elbow. This will close the airflow circuit.

STEP 9

Get creative using the spare rubber from the tire and use your exacto to cut small strips of rubber and create kinky outfit. I just did this by eye and hot glued the pieces together. Reference the pictures for my execution.

STEP 10

Load shooters into hopper and get weird and have fun.

This build is pretty easy to figure out so please excuse my lack of detail here. It's pretty silly so didn't feel the need to get super detailed on this. Also please reference the above video should you need a little more clarity.

Thanks!

If you wanna see more projects we've made, you can check out my YouTube channel here find me on Instagram at @startegist. Thanks for the support!