SP Water Pump

Finished Product, Exterior and Interior Housings.

Total Summary and Sectional Breakdown

Three Different Valves needed.

PVC cross section with wrapped in cloth.

65mm Ø PVC Housing. Valve on inlet. Valve stopper to keep valve in position.

40mm Ø outlet housing. Outlet valve. Stopper to keep valve in position.

Rebar welded to 20mm Ø steel. Connect to wood handle by PVC and glue.

40mm Ø male connector and 40mm Ø PVC drilled to accept pin. Covered by 65mm Ø PVC.

40mm Ø drilled section. One end plug by cement, 70mm length.

Valve on interior housing. Two different options shown depending on available material. Pressure seal added between threaded connectors.

Interior housing finished.