Scrap Wood Bottle Opener
This bottle opener is so EASY to make! All you need is some scrap wood and a nut/bolt. It is also super fun to use and is a fun trick to show off at parties.
Materials
Materials
Scrap Wood - just a long skinny piece, I cut a 9" x 2" piece I found in the workshop.
Nut and Bolt - make sure the bolt is at 3/4" longer than the width of the wood
Tools
Drill
Saw
Scrap Wood - just a long skinny piece, I cut a 9" x 2" piece I found in the workshop.
Nut and Bolt - make sure the bolt is at 3/4" longer than the width of the wood
Tools
Drill
Saw
Cut Wood - If Needed
Use the saw to cut wood to desired length. You will want to sand your wood after to make sure it is safe for use.
Drill Hole
Drill hole at the end of the wood about 1/2" to 1" from the end.
Insert Nut and Bolt
Put the bolt in the hole.
Leave the head of the bolt sticking out 1/2" to 3/4" from the wood. Screw nut on end of bolt on the other side of the wood.
Leave the head of the bolt sticking out 1/2" to 3/4" from the wood. Screw nut on end of bolt on the other side of the wood.
Have Fun!
I got this idea from a restaurant in Vietnam. The waiter was really charasmatic and used this bottle opener. He gave us each one to bring home. It is lots of fun to use!