Security Lamp

This was my first instructable and I show you how to make security lamp. I made it for pacifically small business that get thefts often and there a way to protect employees and customers for people who think that are there a main character and have no consequences in there mind.

1. a broken lamp
2. 3 older camera
3. Tape

You have to in unscrew the bottom form the top. Take of part the top in the four pieces and start to unscrewed to camera from the based of the motherboard. Set side the clear plastic domes and the camera.

Unscrewed the camera from the plastic tops form the bottom. First unscrewed all of the screwed for the plastic and spilit into all four parts. Camera part is unscrewed the bottom and see the motherboard where the camera is connected and unconnected them. Pull out the camera and be careful with will out the wires. Set of side the clear plastic domes and the plastic.

Unscrewed the top form the bottom and take a part the three plastic parts and not try to break the clear plastic domes. Unscrewed the bottom form the camera and goes to the motherboard a takes out of the bottom. Take the wires out of the motherboard and careful pull out the wire from the camera hole. Set sides the clear plastic domes and the camera,

Grab the broken lamp and separated the base for the tops light. Grab wire cutter and started cut the black and white wires. Set sides the lights.

Grab your three camera, three clear plastic domes, and the top of lights. Put one of the cameras in the light and used the tape connect to the lamp do thing again 3 times. Grab the clear plastic domes and put on the outside and used tape to keep in place.

This is the end result I got and we were putting it on the green screen to see if we can use it. Edit it I did use AI generated for the second image to get how I wanted it you don’t have to use AI you can use edit software as to get the result you wanted.