SliDad | a Slide That Allows a Parent in a Wheelchair to Safely and Comfortably Lift and Lower a Toddler
by shaharraa in Workshop > Laser Cutting
400 Views, 1 Favorites, 0 Comments
SliDad | a Slide That Allows a Parent in a Wheelchair to Safely and Comfortably Lift and Lower a Toddler

A slide that allows a parent in a wheelchair to safely and comfortably lift and lower a toddler.
Supplies

B.O.M
Preparing the Mold

Produce an economical mold for bending the slide.
Laser Cut

Acrylic Perspex sheet
Downloads
Heat and Bend

Bend the central arc on the mold.
Bending the Margin

Heating the edge of the slide with an industrial heat Gun.
Bending the Upper and Lower Parts

The bends of these parts must be made according to the person for whom the slide is being prepared.
Bending the Leg

This is the part that goes under the user's leg and fixes the slide between the user’s leg and the cushion of the wheelchair.
Gluing the Leg

Stick the leg to the central part of the slide with Liquid glue.
Enjoy!

You are welcome to watch our process in the video: https://youtu.be/KdXg3lyLDvQ