Small Kids PVC Bow

this is a small, fast-to-make kids PVC bow

What you will need-

• 1/2 pvc pipe
• scissors
• paracord
• drill
• screw
• hacksaw (or anything to cut the pvc)
• A dowel rod (or arrow if you have one)
• duck tape (only if you don't have an arrow)

the piece of pvc I had on hand was to long so I cut it with the hacksaw to the length above.

next, I cut notches on both sides of the pipe with a hacksaw .

with a paracord strand about 5 feet, you will tie the paracord to on notch with the knot shown above.

you will bend the bow to you wanted arch and mark where you need to tie the second knot and then take bow string off both sides and tie your second knot.

slip one of the knots on to the notches on your pvc and then bend it under you leg to slip on the other side of the paracord onto the other side of the bow.

once you are done with the previous step you should have something like this. trim off the extra paracord.

drill a screw half way in on left side of the bow in the center (or right side if you are left handed).

once you apply the duck tape (as shown above) and then cut the fletching to correct shape.