Spiderman Wall Art Laser Cut

In this blog, you can try to make a Spiderman Wall Art. It's made of just plywood. If you have a laser cutter and like the Spiderman figure, try making one.

MATERIALS:

1. 3mm thickness plywood (20*40cm),
2. Red, Black and White spray or Acrylic marker
3. Wood glue

EQUIPMENT:

1. 20W NEJE Laser Cutter
2. Software: Lightburn

You will only need to cut with this file. As usual, I use light-burn as my laser working software. You can also use laser-grbl or other software you like to create laser crafts.

You can see there are different color once you upload. Each color need different color. The background is red, the web is black, and the eyes are white.

Your machine should be large enough for laser engrave and cut a 40*20cm plywood sheet. Otherwise, you may need to adjust your file or cut them one by one. But since it is just a wall decoration, the size depends on your own preference.

As I mentioned above, the background is red, the web is black, and the eyes are white. You can also choose to color with acrylic markers. These two methods are more suitable for coloring wood and can greatly cover the wood grain of the plywood itself.

Arrange them in order and fix them with glue. The order is ‘Red-Black-White’.