TRIUMPH Bonneville- Replacing the Original Rear Turn Signals on the Kellermann Bullet 100 DG
by Czogy in Workshop > Motorcycles
18 Views, 0 Favorites, 0 Comments
TRIUMPH Bonneville- Replacing the Original Rear Turn Signals on the Kellermann Bullet 100 DG
The original turn signals and the original rear/brake light are exchanged for Kellermann Bullet DG (rear light/turn signal combination).
I've created a description of how to replace the stock turn signals on a modern Triumph Bonneville Speedmaster / Bobber with Kellermann Bullet 100 DG indicators.
These indicators are a combination of turn signal, taillight, and brake light.
3D printed parts are required for the conversion, which are also available as files for download.
There are STL and 3mf Files.
Download all 3D Files as ZIP File:
Parts: https://drive.google.com/file/d/1EIULOPBQXoSXjGRgJE2pJQWXaLYupxOI/view?usp=sharing
description: https://drive.google.com/file/d/1684XHsfujpl-KITcQSguZLxH-Jbdg5m8/view?usp=sharing
Furthermore, the description shows how to adjust the changed, very fast flashing frequency by relearning the indicators.
Supplies
Required components:
- 2x Kellermann Bullet DG (combination turn signal/ rear light/ brake light)
- 3D Printing Parts (see below) Recommendation: Filament PETG Black matt
- Screws & nuts, washers:
- 2x Inbus M6 x 20; 2x M6 Mutter - A2 (Niro)
- 3x Inbus M5 x 15; 3x washer (large) ; 3x threaded bushings (for hot press-fitting)
Loctite (or similar) threadlocker
Work description:
A detailed description is available as a PDF in German and English:
Download it !