TinkerCAD Figures

by 823816 in Craft > Digital Graphics

18 Views, 0 Favorites, 0 Comments

TinkerCAD Figures

Screenshot 2025-05-23 11.11.11 AM.png

I made a figure template in TinkerCAD because I wanted to have some fun! They are 3d printed and can be colored and customized. This is only a template.

Supplies

You will need to go to https://www.tinkercad.com to get started and a 3d printer!

Create the Head

Screenshot 2025-05-23 11.20.10 AM.png

Make a 20mm by 20mm by 20mm cylinder and set sides to 48, bevel to 25, and set segments to 8. You can use any color.

Limbs

Screenshot 2025-05-28 11.21.09 AM.png

Place a rectangle and set its length by width to 20mm by 17.5mm. Make sure to set it's height to 35mm. Additionally, set the radius to 1, and set steps to 8.

Torso

Screenshot 2025-05-28 11.32.39 AM.png

Get another rectangle and set its dimensions to 20mm, 35mm, and set its height to 35mm too.

Exporting

Screenshot 2025-05-30 11.34.28 AM.png
Screenshot 2025-05-30 11.39.55 AM.png

group all of the objects together and export them as an STL. Then slice them and print! (I used Prusa Slicer!.) Then import the file into Prusa Slicer, then slice the STL.

Glue

IMG_20250530_114112.jpg

Lastly, use glue to glue all the pieces together. Now you have a template of a figure! You can customize it in tinkerCAD to put your own twist on it! Additionally, you can also paint it to bring it to life!