Transformers Damage Counters - 3D Printed

by g3holliday in Workshop > 3D Printing

395 Views, 4 Favorites, 0 Comments

Transformers Damage Counters - 3D Printed

DSC_0045.JPG
TCG Assortment.png

I recently got a 3D Printer, and I decided it would be fun to print some Transformer damage counters.

Let's get to it!

Supplies

  1. 3D Printer
  2. Filament
  3. Computer

Preparing to Print

TCG Assortment.png

The STL files are here: TinkerCad

Use these settings:

  • Infill: 10%
  • Supports: None
  • Bed Temp: 44 C°
  • Extruder Temp: 125 C°

I recommend putting masking tape on the printer bed to make the counters easier to get off.

Let's Print!

DSCN5659.JPG

Print the file.

It should take a couple of hours, but it may vary by printer.

Expect to lose a few in printing.

Done!

TCG Assortment.png
DSC_0120.JPG

This was easy, right!

Thank you for viewing!

Merry Making,

g3holliday