Twinkling Branches Room Divider

Add a little magic to your home with a twinkling branches room divider!

6 - 24" long 1"x3" pine boards

6 - 60" long 1"x3" pine boards

24 -1 1/4" wood screws

18 - 3/4" wood screws

Drill

4 - 2" long hinges

Thick galvanized wire

Wire cutters

Americana Decor Chalky Finish in Rustic and Serene

Paintbrush

Wax

Sanding block

12 - 60" long branches

Create four 24" x 60" frames by connecting each corner with two 1 1/4" long wood screws

Connect the frames together using the 2" long hinges

*make sure that the frames are in a zigzag pattern

Drill three screws on the top and bottom of each frame leaving 1/4" sticking out

Attach the galvanized wire around the 3/4" screws from top to bottom

on each of the three frames

*You will be attaching the branches to these wires

Paint the edges of the room divider with the Rustic Chalky Finish paint

*You can be messy with this color

When dry, rub wax over the Rustic paint

Paint the entire room divider in the Serene Chalky Finish and let dry

Sand the edges of the room divider to expose the Rustic color underneath and to give the room divider a shabby chic/antique feel

Cut about 30 - 5" long pieces of wire

Attach the branches to the wire that was stretched from the top to the bottom

of each frame of the divider

*Clip the branches that extend over the edges

Wrap the white Christmas tree lights around the branches and plug it in!