Wolf and Rabbit

These photos are what the game board looks like at different angles, while also showing you three of the pieces used to play the game

Supplies you need:

1. 3D printer
2. Green filament
3. Brown filament
4. Gray filament
5. White filament
6. Red filament
7. Sandpaper to smooth down any jagged edges (recommend sanding until it doesn’t as sharp edges, however this is optional)
8. yellow/beige filament
9. 15 minute hour glass (optional since you can use a phone or another type of timer)

Complete steps on how to build Board Step 1: Start with a 15.5 inch square.

Step 2: Create a 12 by 12 grid of 1.25 in square holes and place them in the original square. Create a few extra for the tiles.

Step 3: Group the pieces

Tiles Step 1: Create a square that covers 4 of the holes in the board

Step 2 Then, change the color of the square to green (preferred color) or any other color you may want to use.

Step 3 Take the extra squares from before and reduce their size by 0.1 on all sides with 4 of these squares beneath the original tile.

Step 4 Place the square onto the grid and duplicate until the board is filled Step 5 Create paths with the color of choice and decorate

Pieces Step 1: Start with a base and a body with white cylinders

Step 2: Place a white ball on top as a head

Step 3: Create the ears by overlapping triangles and and ovals

Step 4: Duplicate the ear and reduce its size. Placing it in the original. Change its color Step 5 Place the ears on the head and tilt them outwards.

Wolf Pieces Step 1: Create the base from the rabbit piece

Step 2: Create the head with a ball and a cone with the tip removed

Step 3: Place another ball at the tip and using a process similar to the rabbit ears using triangles make the ears

Step 4: Adjust to the correct color and combine.

Trap Pieces Step 1: Start with a tube

Step 2: Top the tube with a bar

Step 3: Create a half tube shape

Step 4: Cover the surface of the half tube with triangles as spikes Step 5 Group it all together and change to appropriate color

Step 1: Take a base from the board and add circular hole

Step 2: Make a column of the same size as the hole and make a slightly smaller hole in it

Step 3:Place them together

Snake Hole step 1: Take a copy of the rabbit hole

Step 2: Draw a snake using the scribble tool