Wood Light Saber

this is my light saber i made this so i didn't have to drop a 100$ on one and i wanted to make it easy for you and me to make. not all of these image's are me some are google because i didn't want to show my face.

drill

table saw

led strip with remote

wires

soldering gun

1.25 inch wide wood stick

1 inch wide wood stick

battery pack

tap and die set

1.16 inch blurred plastic pipe

1: cut the usb port from the led strip

2: use the soldering gun and attach the wires from where the usb port was to the positive and negative parts from the battery pack using soldering gun and keep the sensor on there and make sure the battery pack watts is the same as the led lights need

take the table saw and cut the 1.25 inch wide wood stick too about 12 inches long

and take the 1 inch wide wood stick and cut it to about 3 feet and 5 inches long do the same for the blurred plastic pipe

now take the tap and die set and use them so you can screw the 3 feet and 5 inch stick and give it teeth about 5 inches

and give the blurred plastic pipe the same thing and give the 1.23 inches wide one and give it a 5 inch hole of teeth so you can screw them together but don't put the plastic pipe in yet

now cut a little box in the handle so you can put the battery in and wrap the led lights around the blade of the lightsaber and than pup the plastic pipe around the blade. and you're done the lightsaber should be strong so you can use it in a play fight