Wooden USA Flag

by Corbin_Sullins in Workshop > Woodworking

269 Views, 1 Favorites, 0 Comments

Wooden USA Flag

Tools-

Table Saw-PCS175

Miter Saw-DW718

Nailer-DC616

Drill-DCD777

Sander-DWE6421

Plainer-DW735

Supplies

Materials

4 8 foot Rough sawn furring strips

1x3x8 x1

Wood glue

Painters tape

Union star template https://www.amazon.com/gp/product/B076HM92PG/ref=...

Red,white and, blue spray paint

Foam brushes

180 grit sander pad

Cutting Bottem 6 Stripes

Using a Miter Saw cut 6 strips 36 5/8 inches long.

Cutting Top 7 Stripes

Using a Miter Saw cut 7 Stripes to 22 inches long.

Glue the 13 Stripes Together

If the Wood Does Not Line Up Push It All Together at the Oppsite Side of the Canton

I used a table saw to cut a blades width off so it was straight.

For the Canton Cut 4 3x1x14.5

Glue Them Together

I Laid It Out to Make Sure That All of Pieces to Fit

These Are the Colors That in Chose

Tape Off the White Stripes Then Spray the Flag Red

Then Tape Off the Red Stripes

Spray the Flag White and Remove Tape

This Is the Product After Painting

Spray the Canton Blue

Spray the 50 Stars

I used a stencil to spray the 50 stars

Link-Union star template https://www.amazon.com/gp/product/B076HM92PG/ref=...

Wooden USA Flag

Wooden USA Flag

Supplies

Cutting Bottem 6 Stripes

Cutting Top 7 Stripes

Glue the 13 Stripes Together

If the Wood Does Not Line Up Push It All Together at the Oppsite Side of the Canton

For the Canton Cut 4 3x1x14.5

Glue Them Together

I Laid It Out to Make Sure That All of Pieces to Fit

These Are the Colors That in Chose

Tape Off the White Stripes Then Spray the Flag Red

Then Tape Off the Red Stripes

Spray the Flag White and Remove Tape

This Is the Product After Painting

Spray the Canton Blue

Spray the 50 Stars

Next Glue the Canton to the Stripes

Now the Flag Is Finished