Xenon XR-15 Sniper Rifle 1.2

This is my Xenon XR-15 Sniper Rifle 1.3. I features a long fake barrel, top rail, front and rear handle, stock and is true trigger.

Version History
1.0 Original Sniper. Very Weak
1.1 Extended barrel and added scope
1.2 Re-built handle and made better

You will need a good eye but i have taken lots of photos to help you.

1 - Angled view.
2 - Side view.
3 - Front view.
4 - Rear view.
5 - Top view.
6 - Bottom view.
7 - Upside down angled view.

Again, you will need a good eye but i have taken lots of photos to help you.

1 - Angled view.
2 - Side view.
3 - Front view.
4 - Rear view.
5 - Top view.
6 - Bottom view.
7 - Upside down angled view.

This step is very easy to do.

This is the 'juice' of the gun.

1 - Firing pin.
2-5 - Barrel

This is a basic hopper.

1 - Make this
2 - They join here
3 - Join

This is the trigger and the handle

1 - trigger
2 - handle part 1
3 - make 2 of these
4 - handle part 2
5 - join pieces
6 - add trigger
7 - add handle part 2

You will need a very good eye for this.

Time to put it all together.
Follow the notes

Time to place the rubber bands

First put a blue rod in the hopper, pull back the firing pin and pull the trigger