Zelda Chest and Fairy DIY
![DIY ZELDA CHEST](/proxy/?url=https://content.instructables.com/FPY/U056/JAIJNBW6/FPYU056JAIJNBW6.jpg&filename=DIY ZELDA CHEST)
![Screenshot (30).png](/proxy/?url=https://content.instructables.com/FZQ/WML6/JAIJLZP4/FZQWML6JAIJLZP4.png&filename=Screenshot (30).png)
![Screenshot (1).png](/proxy/?url=https://content.instructables.com/FPU/CE3H/JAIJLZST/FPUCE3HJAIJLZST.png&filename=Screenshot (1).png)
![Screenshot (34).png](/proxy/?url=https://content.instructables.com/FM7/YVLQ/JAIJLZSS/FM7YVLQJAIJLZSS.png&filename=Screenshot (34).png)
![Screenshot (2).png](/proxy/?url=https://content.instructables.com/FFN/ZIFE/JAIJLZSU/FFNZIFEJAIJLZSU.png&filename=Screenshot (2).png)
![Screenshot (32).png](/proxy/?url=https://content.instructables.com/F8K/RCF7/JAIJLZQQ/F8KRCF7JAIJLZQQ.png&filename=Screenshot (32).png)
![Screenshot (33).png](/proxy/?url=https://content.instructables.com/FRU/956G/JAIJLZRR/FRU956GJAIJLZRR.png&filename=Screenshot (33).png)
A little different for me but I decided to do a zelda chest and fairy bottle DIY! Haha I hope you guys still like it. If you do, should I do more? I have fun with stuff like this too. =D Go to Youtube.com/msmaomaoz to subscribe and help me out!
What You Need
![Screenshot (4).png](/proxy/?url=https://content.instructables.com/FOR/C2MM/JAIJLZUY/FORC2MMJAIJLZUY.png&filename=Screenshot (4).png)
What I used to get this done:
-pre-made chest (if you know how you can obviously make your own)
-glass bottles & cork tops
-fuzzy little balls
-transparent string
-white felt paper
-scissors
-hot glue
-paint (brown, yellow, and gold)
Most stuff I had at home if I didn't then I got it at Micheal's but I'm sure any craft store will have it.
Starting
![Screenshot (5).png](/proxy/?url=https://content.instructables.com/FCM/SNOZ/JAIJLZW1/FCMSNOZJAIJLZW1.png&filename=Screenshot (5).png)
To start off I made sure my corks fit in the bottles.
Prep
![Screenshot (6).png](/proxy/?url=https://content.instructables.com/FQM/Q7C7/JAIJLZW2/FQMQ7C7JAIJLZW2.png&filename=Screenshot (6).png)
![Screenshot (7).png](/proxy/?url=https://content.instructables.com/F88/AJP6/JAIJLZW5/F88AJP6JAIJLZW5.png&filename=Screenshot (7).png)
I then took out three colors of the little fuzzy balls. I went with purple, blue, and green.
Wings
![Screenshot (8).png](/proxy/?url=https://content.instructables.com/F8B/D7L0/JAIJLZW6/F8BD7L0JAIJLZW6.png&filename=Screenshot (8).png)
![Screenshot (9).png](/proxy/?url=https://content.instructables.com/F1O/EMM5/JAIJLZX9/F1OEMM5JAIJLZX9.png&filename=Screenshot (9).png)
![Screenshot (10).png](/proxy/?url=https://content.instructables.com/FFD/GF9E/JAIJLZXD/FFDGF9EJAIJLZXD.png&filename=Screenshot (10).png)
![Screenshot (11).png](/proxy/?url=https://content.instructables.com/F55/IG4G/JAIJLZXE/F55IG4GJAIJLZXE.png&filename=Screenshot (11).png)
I used that white felt paper to cut out the wing shape. It's one big wing on top and a small one on bottom on both sides of the fairy. I used hot glue to glue on the wings.
String
![Screenshot (17).png](/proxy/?url=https://content.instructables.com/FV0/33D8/JAIJLZIM/FV033D8JAIJLZIM.png&filename=Screenshot (17).png)
![Screenshot (16).png](/proxy/?url=https://content.instructables.com/FF6/9Q6S/JAIJLZIL/FF69Q6SJAIJLZIL.png&filename=Screenshot (16).png)
![Screenshot (18).png](/proxy/?url=https://content.instructables.com/FFI/SGZS/JAIJLZIN/FFISGZSJAIJLZIN.png&filename=Screenshot (18).png)
Once that looked good I took the hot glue again and glued a little bit of the sting to the cork and the other end to the fairy. I then just stuck them in the bottle and they look like the are floating.
Yellow
![Screenshot (19).png](/proxy/?url=https://content.instructables.com/FG5/WOWQ/JAIJLZIO/FG5WOWQJAIJLZIO.png&filename=Screenshot (19).png)
![Screenshot (20).png](/proxy/?url=https://content.instructables.com/FFR/1QVE/JAIJLZIP/FFR1QVEJAIJLZIP.png&filename=Screenshot (20).png)
![Screenshot (21).png](/proxy/?url=https://content.instructables.com/FOA/6AN8/JAIJLZIR/FOA6AN8JAIJLZIR.png&filename=Screenshot (21).png)
![Screenshot (22).png](/proxy/?url=https://content.instructables.com/F40/B2PB/JAIJLZJW/F40B2PBJAIJLZJW.png&filename=Screenshot (22).png)
![Screenshot (23).png](/proxy/?url=https://content.instructables.com/FNU/SP04/JAIJLZKX/FNUSP04JAIJLZKX.png&filename=Screenshot (23).png)
I took yellow acrylic paint to paint the edges, middle, center, and bottom of the chest. You may need a few coats.
Brown
![Screenshot (24).png](/proxy/?url=https://content.instructables.com/FQN/8SG9/JAIJLZKY/FQN8SG9JAIJLZKY.png&filename=Screenshot (24).png)
![Screenshot (25).png](/proxy/?url=https://content.instructables.com/FJZ/DGMV/JAIJLZLZ/FJZDGMVJAIJLZLZ.png&filename=Screenshot (25).png)
![Screenshot (26).png](/proxy/?url=https://content.instructables.com/FIO/4RX2/JAIJLZN1/FIO4RX2JAIJLZN1.png&filename=Screenshot (26).png)
Taking brown paint I painted that everywhere else that I didn't use yellow. I didn't like the first brown I used so I ended up repainting it darker. Haha.
Inside
![Screenshot (27).png](/proxy/?url=https://content.instructables.com/FN2/1CBJ/JAIJLZN4/FN21CBJJAIJLZN4.png&filename=Screenshot (27).png)
I painted the inside of the chest yellow.
Gold
![Screenshot (28).png](/proxy/?url=https://content.instructables.com/F2T/0SX7/JAIJLZNW/F2T0SX7JAIJLZNW.png&filename=Screenshot (28).png)
![Screenshot (29).png](/proxy/?url=https://content.instructables.com/FUS/D4SG/JAIJLZO0/FUSD4SGJAIJLZO0.png&filename=Screenshot (29).png)
I used gold paint (mine is airbrush paint because it's what i had but you can use regular gold acrylic paint) and I put that over all the yellow.
DONE
![Screenshot (31).png](/proxy/?url=https://content.instructables.com/F83/8ISQ/JAIJLZPY/F838ISQJAIJLZPY.png&filename=Screenshot (31).png)
![Screenshot (3).png](/proxy/?url=https://content.instructables.com/FUF/CLX3/JAIJLZTV/FUFCLX3JAIJLZTV.png&filename=Screenshot (3).png)
All done! easy and fun! =)