Knex 5 Pound Gatling Gun.

by dsman195276 in Living > LEGO & K'NEX

15377 Views, 29 Favorites, 0 Comments

Knex 5 Pound Gatling Gun.

$C:\Documents and Settings\Owner\Desktop\FXUIMT1F54HJ7FM.MEDIUM.jpg$

$E:\DCIM\100K3800\DCP_0980.JPG$

$E:\DCIM\100K3800\DCP_0979.JPG$

$E:\DCIM\100K3800\DCP_0984.JPG$

$E:\DCIM\100K3800\DCP_0982.JPG$

very big and strong gatling gun. works very well. made by Givadanger.

just to let you know, there have been 3 other instructables on this gun . this is the orignal not some copy of someone elses work.

Base

$E:\DCIM\100K3800\DCP_0970.JPG$

$E:\DCIM\100K3800\DCP_0971.JPG$

$E:\DCIM\100K3800\DCP_0972.JPG$

$E:\DCIM\100K3800\DCP_0969.JPG$

$E:\DCIM\100K3800\DCP_0968.JPG$

this took me a long time to make from the few pictures of it.

Barrel

$E:\DCIM\100K3800\DCP_0994.JPG$

$E:\DCIM\100K3800\DCP_0999.JPG$

$E:\DCIM\100K3800\DCP_0996.JPG$

$E:\DCIM\100K3800\DCP_0998.JPG$

$E:\DCIM\100K3800\DCP_1000.JPG$

$E:\DCIM\100K3800\DCP_0997.JPG$

$E:\DCIM\100K3800\DCP_1002.JPG$

$E:\DCIM\100K3800\DCP_1003.JPG$

$E:\DCIM\100K3800\DCP_1001.JPG$

you need to make 8 barrels.

Drive Rod

$E:\DCIM\100K3800\DCP_1004.JPG$

$E:\DCIM\100K3800\DCP_1005.JPG$

$E:\DCIM\100K3800\DCP_1006.JPG$

$E:\DCIM\100K3800\DCP_1007.JPG$

$E:\DCIM\100K3800\DCP_1008.JPG$

make from the pictures.

Putting It Together

$E:\DCIM\100K3800\DCP_1009.JPG$

$E:\DCIM\100K3800\DCP_1013.JPG$

$E:\DCIM\100K3800\DCP_1012.JPG$

$E:\DCIM\100K3800\DCP_1011.JPG$

$E:\DCIM\100K3800\DCP_1016.JPG$

$E:\DCIM\100K3800\DCP_1010.JPG$

$E:\DCIM\100K3800\DCP_1014.JPG$

$E:\DCIM\100K3800\DCP_1015.JPG$

$E:\DCIM\100K3800\DCP_1018.JPG$

put the barrels on the drive rod.

Loading and Firing

$E:\DCIM\100K3800\DCP_1008.JPG$

$E:\DCIM\100K3800\DCP_0981.JPG$

$E:\DCIM\100K3800\DCP_1019.JPG$

$E:\DCIM\100K3800\DCP_1020.JPG$

$E:\DCIM\100K3800\DCP_1021.JPG$

1. move blue gear. pic 1

2. pull back rams. pic 2

3. load yellow rods. pic 3 and 4

4. move blue gear back, turn motors on and push triger firer( thing on the side). pic 5

Crank Atachment

$E:\DCIM\100K3800\DCP_1022.JPG$

first build the back.

atach with green rods insted of yellow rods.

then atach the crank.