Knex Pump Action Assualt Rifle

Knex pump action rifle simple and works well. please comment and rate.

pros
true trigger
very good range with a few rubber bands.
powerful
quick to reload
mag that doesn't have a pusher sticking out the bottom
ten shot mag
can be loaded from the front when the mag is empty without knex fulling out of the mag

cons
rubber bands are hard to put on
takes ages to refill the mag

this barrel came from the MES V-A1 Sidearm

1. make this
2. make this
3. make these
4. add (3) to (2)
5. add (1) to (4)

this is my magazine where bullets can be loaded from the front without dropping out the mag. it holds 10 grey / purple connectors.

1. make this
2. make this
3. make this
4. connect to barrel

making the side covers for the barrel.

1. make these
2. add them to the barrel.

how to make the top part of the gun, mainly for strength.

1. make this
2. make this
3. join (1) and (2) together

how to make part of the trigger

1. make these
2. add them to the gun
3. make this
4. add it to the gun

this isn't all the pump but its the important bit.

1. make this
2, 3 attach it to the gun
4. make the firing pin
5. add it to the gun
6. end of step

this is the rest of the trigger

1. make this
2. connect it to the gun
3. add grey rod

1. make this
2. make this
3. join (1) and (2) together.
4. attach to gun

this is the part of the pump that you hold

1. make this
2. attach it to the gun

the stock is not required, if you would prefer not to have it skip this step

1. make this
2. make this
3. connect (1) and (2) together
4. add (3) to the gun

nearly there!!

rubber bands
1, 2. put rubber bands on firing pin
3. put rubber band on pump
4. put rubber band on front part of trigger

loading
5. open mag and put grey / purple connectors in. DO NOT PUT MORE THAN TEN IN AT A TIME.
6. put pusher in, close magazine and put rubber band around pusher.

you are now finished, remember tell me if any bits of my instructions are hard to follow and i will fix them up.
thanks fo building