*Note any highlighted variable is one you can change								
								
Power Source:								
(Li-ion)	Cell Max:	4.20 V						
	Cell Min:	3.00 V						
	Cell Count:	3						
								
	Voltage Max:	12.60 V						
	Power Min:	9.00 V						
								
Heating ellement:								
(Resistors In parrallel)	Target Power:	10 W						
	Target Resistance:	15.88 ?						
								
	Branch Resistance:	> 31.75 ?	*This only applies if there are 2 resistors in parrallel where each branch is for each resistor					
	Branch Power:	> 5.00 W						
								
Electronics					Current:		Voltage Drop	
(Thermistor)	Resistance (25C):	1000 ?		Pot Min (25C)	0.011 A		10.50 V	*Note: when changing the (resistor) value you should aim for the highest voltage drop here:
	Resistance (100C):	80 ?		Pot Min (100C)	0.045 A		3.60 V	*and approximately 2-3V here
	Highest Power:	0.16 W		Pot Max (25C)	0.001 A		1.13 V	*Note: Change the (potentiometer) value for approximately 2-3V here
				Pot Max (100C)	0.001 A		0.10 V	* and below 2 V here
(Resistor)	Resistance required:	200 ?						
	Highest Power:	0.41 W						
								
(Potentiometer)	Min Resistance:	0.00 ?						
10 K	Max Resistance:	10000 ?						
	Highest Power:	0.02 W						
							(current)	
(LED RED)	Li-ion Cut off:	10.00 V		Resistor 1:	165 ?		0.05	
	LED voltage:	1.75 V		Resistor 2:	35 ?